Basic Info.
Description
Abrasive Sandblasting Cabinet Machine
After-Sales Service
Available with Engineer Overseas
Use
Descaling / Stripping
Industry Used
Pharmaceutical Cleaning
Transport Package
Wooden Case
Product Description
Main technical parameter
Model | STR-1010 |
Machine overall dimension | L1420mmW1000mmH2200mm |
Equipment workroom dimension | L1000mmW1000mmH780mm |
Feed port size | W1000mm*H720mm |
Dedusting fan | 0.75KW 220V 50HZ |
dusting method | Cloth bag dust removal 6 |
Operation opening holes | Two (gloves: one pair) |
Perspective window | One |
foot pedal switch | One |
headlamp | 12W LED light 2pcs |
Number of guns | one (high speed pressure gun) |
Air pressure | 2-7(kg/cm2) |
Flow volume | 0.8-2.0m3/min(different product and process flow) |
Total Power | 0.75KW |
Machine body | 2mm cold rolled sheet (airframe electrostatic powder spray, not easy to scratch, long-term no rust) |
Advantages of sand blasting machine
1,sandblasting machine metal parts were not damaged, dimensional accuracy will not be changed;
2,the part surface is not contaminated, abrasive and parts of the material will not react.
3,processing groove blasting machine can easily, difficult to concave contact parts, various sizes of abrasive can choose to use the treatment cost;
4,decrease is mainly reflected in the sandblasting machine and improve the working efficiency, can meet a variety of surface finishing requirements;
5,low energy consumption and cost;
6,sandblasting machine does not pollute the environment, eliminating the cost of environmental governance
Application range of sand blasting machine
Sand blasting machine is a new surface treatment and processing equipment, widely used in machinery, electronic locks, watches, glasses, hardware tools, mold, glass, ceramics, crafts, medical equipment and other industries, can remove the rough casting, forging, stamping, welding, oxidation heat treatment and machining parts, residue and burr, glass three-dimensional carving, stencil printing process.
The watches, glasses and other decorative surface play a beautiful effect of alloy imitation. It is ideal surface processing and handling equipment at present.
How to choose the sandblaster
1. Depending on the size of the workpiece, select the box sandblasting machine, the moving sandblasting machine, and the automatic sandblasting machine;
2. To look at the shape of the product, choose the specifications of the sandblasting machine, generally have fixed specifications below one meter, especially large to order or choose the open.
3.The degree of surface requirements for the product. This should see is to use dry spray or wet spray, if be dry spray, the choice of abrasive is many, wet spray is glass sand commonly etc.
4. Some fittings of sandblasting machine should be familiar with. Sandblasting guns and sandblasting gloves are often replaced because the sandblasting wear is severe.
Common faults and troubleshooting methods of Sand blasting Machine
fault phenomenon | probable cause | troubleshooting |
Good Abrasives enter the vacuum bag | New dust collection bag separator adjustment strap opening is too large , abrasive is too fine | The minor openings can be eliminated after 8 hours of use , and coarser abrasives are used |
brasive leakage in the working site | Vacuum bag with holes or unclamped | Replace the dust collection bag and re - clamp the dust collector |
Not clear sight in sand blasting | 1.The vacuum bag plug; the vacuum bag aging blocked2.recovery pipe is blocked3. gas nozzle hole too compressed air pressure is too high | The vibrating dust bag is replaced by the vacuum bag to remove the recovery tube and check the cause of the blockage: the aperture can not be greater than the 5.6mm and is adjusted according to the recommended pressure. |
Low processing efficiency | Compressed air pressure too small nozzle and air nozzle too small to use abrasives have exceeded their service life (too much broken abrasive and dust) | Increase pressure to replace larger nozzles and air nozzles to empty old abrasives and reload them with new abrasives |
An uneven or pulsating abrasive. | Too little abrasive compressed air pressure too low nozzle clogging abrasive wet | Add abrasive to adjust the pressure to eliminate the abrasive in the tank and fill the dry abrasive to check the water content in the air path |
Address:
No. 9 Huanghai West Road, Dafeng District, Yancheng, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001
Company Introduction:
We are a professional company in the manufacture and export of shot blasting machines.
1. Shot blasting equipment series:
Hook type shot blasting machine, rubber belt shot blasting machine, steel material series pretreatment equipment,
H beam shot blasting machine, steel pipe inner and outer surface shot blasting machine
2. Sand blasing machine and sand blasting room series: Large parts, casting parts, non-standard parts sand blasting
3. Steel shot, steel cut wire shot and casting steel shot
4. Manage various type of wear-resisting parts of shot blasting machine and equipments maintenance and remould